DESIGN AND FABRICATION OF MULTIANGLE DRILLING MACHINE


EOI: 10.11242/viva-tech.01.04.015

Download Full Text here



Citation

Padave Siddhesh, Pawar Bhushan,Sankhe Aniket, Patil Viraj , "DESIGN AND FABRICATION OF MULTIANGLE DRILLING MACHINE", VIVA-IJRI Volume 1, Issue 4, Article 15, pp. 1-6, 2021. Published by Computer Engineering Department, VIVA Institute of Technology, Virar, India.

Abstract

A normal drill machine is commonly used for making holes on desired surface of the workpiece. In industries, the vertical drill machine is widely used for the purpose whereas when it cannot be used, at that time other types of drill machines are used. With the vertical drill machine we mostly makes perpendicular holes but with the use of jig and fixture or other attachment we can easily make holes at a desired angle on workpiece. So, knowingly the objective of project is to provide an alternate flexible system which can replace these thing with good performance and similar quality results with the help of CAD CAE. The project deals with designing, analysis and fabrication of multiangle drilling machine of each designed component with the existing system is modeled on SOLIDWORKS software and the analysis is done on ANSYS Workbench software and fabrication is carried out using various modification in drilling machine.

Keywords

Bevel Gear, Double Carden Universal Joints, Spline Shaft, Rack and Pinion, Design and Fabrication.

References

  1. Nandewalia Prajal, Malaviya Krunal, Prof. Chauhan Hiral, Prof. Vipul Goti, To investigate the Graphical Drilling Machine, and proposed that this drill machine can drill graphically in all direction, the drill rotates about two axes (i.e X-axis & Z-axis), Vol.5, 2018
  2. Lookesh kumar sahu,, Design & Fabrication of 360 flexible drilling machine, IJSRD- International Journal Of Scientific Research & Development, 2018
  3. Abhishek Mandal , “Static structural Analysis of Universal joint to study the various stresses and strains developed in power transmission system”,(IJERT), vol.5, March 2016.
  4. Rohan R. Kurlapkar, M.M.Mirza, V M Naik, “Design And static structural Analysis of Bevel Gear,” (IJETT),vol.35, May 2016.
  5. Mr. K. I. Nargatti, Mr. S. V. Patil, Mr. G. N. Rakate, Design, And Fabrication of Multispindle Drilling Head with Varying Centre Distance, International Journal of Trend in Research and Development, Volume 3(3), May-Jun 2016, Pages 506 – 508.
  6. R.Anandhan, P.Gunasekaran, D.Sreenevasan, D.Rajamaruthu, Design, and Fabrication of Angular Drilling Machine , International Journal of Innovative Research in Science, Engineering and Technology, Vol. 5, May 2016 , Pages 88 -95.
  7. Mr. Jay M. Patel, Mr. Akhil P. Nair, Prof. Hiral U.Chauhan, 3-Directional Flexible Drilling Machine, International Journal for Scientific Research & Development, Vol. 3, January 2015, Pages 1262 – 1264.
  8. Prof. M. S.A.A.Shingavi, Dr.A.D Dongare, Prof. S.N.Nimbalkar,, Design of multiple spindle drilling machine, International Journal of Research in Adevent Technology, 2015.
  9. Dhananjay Ghanshyam Pardhi, “ Stress analysis of spline shaft using finite element method ,” (IJMERR), vol.4, Oct 2014.
  10. Dhananjay S Kolekar, Abhay M Kalaje, Swapnil S Kulkarni, “Design Development and Structural Analysis Of Universal Joint”, International Journal of Advanced Engineering Research and Studies(IJAERS)2013.