Design and Development of Car Wash Steamer


EOI: 10.11242/viva-tech.01.03.05

Download Full Text here



Citation

Aakash Jamsutkar, Shubham Jangle, Hardik Karpe, Chetan Kate, "Design and Development of Car Wash Steamer", VIVA-IJRI Volume 1, Issue 3, Article 5, pp. 1-4, 2020. Published by Computer Engineering Department, VIVA Institute of Technology, Virar, India.

Abstract

In recent conditions, the system used for washing cars is based on high speed water jet. The cleaning consists of removing dust, mud and dirt particles. This system uses a huge amount of water during cleaning. Prewashing is done using foam which makes the water not reusable. Hence a drainage system is required for removing this wastewater. Hence to overcome this problem car washing using steam is preferred. The Car Washing system using steam uses the force of steam that can clean things up. It has been discovered that steam washing is very convenient and no soapy forms are required that can make the washing much clumsy. The reason behind the use of steam for washing is the reduced waste of water. The development of the steam cleaning system can revolutionize the washing process. Steam does what the commercial washing system cannot do. Steam can easily clean dust and dirt, while for normal cleaning require expensive detergents. So, our main goal is to use steam and do cleaning without affecting or damaging car paint.

Keywords

Car Wash System, Electric, Heater, Steam.

References

  1. Zhiyong Liu, et.al “A high efficiency electric heater based on dual-helical tube and screw-tape for instant water heating.” Science Direct.
  2. Krishnamurti M, et.al “Design of multipurpose Cleaning system by using steam”, International Journal of Latest Engineering Research and Applications”, Vol. 03, May 2018, pp-54-60.
  3. Dr. E. Subbarao, et.al “Design and Thermal Analysis of Steam Boiler (Without & With Baffles)”, International Journal of Advanced Research in Science, Engineering and Technology, Vol. 5, Issues 5 May 2018.
  4. Abhijeetsinh Makwana, et.al “Design of Multi Cleaning System using Steam”, International Journal of Engineering Research and Applications, Vol. 6, November 2016, pp. 45-51.
  5. Sanjoy Chakraborty, et.al “Importance of Three Element Boiler Drum Level Control and its installation in power plant”, International Journal of Instrumentation and Control System, Vol. 4, No. 2, April 2014.
  6. Wang Ping, et.al “Time delay model identification of super-heated steam temperature for electric power boiler”, Science Direct.
  7. L.B.Y Aldabbagh, et.al “Performance improvement by using dual heaters in Storage type domestic water heater”, Science Direct.
  8. B.W. Hogg, et.al “Generalized predictive control of steam pressure in Drum boiler”, IEEE, Vol. 5, No. 3, September 1996.